|
|
| #6 Cobra™ 3/8" Diameter SS Braided Fuel Hose, Black Cloth | Cobra™ Fuel Pressure Regulator Kit For 40mm Kadron Dual Carbs |
Cobra™ Extreme Pressure Braided Fuel Hose is rated at 1000 psi. The 3/8" diameter hose is used for routing fuel to and from carburetors and fuel injuection systems. It will not split or come loose no matter what when used with the proper... | This is the ultimate fuel pressure regulator kit for your dual carburetor application. Adjustable from 1 to 4 psi. It comes with all the necessary push-on Cobra™ AN type fittings and braided German hose to complete the installation. It can... |
$7.95 | $219.95 |
|
|
| #6 Cobra™ Fuel Hose Fitting, Swivel Flare to Hose, Straight | #6 Cobra™ Fuel Hose Fitting, Swivel Flare to Hose, 45 Degree |
If you want nothing less than top-notch quality fuel hoses that won't leak or fail, even under the most demanding of racing conditions, our Cobra™ Hoses & Fittings are the best in the industry. They are simple to assemble and install,... | If you want nothing less than top-notch quality fuel hoses that won't leak or fail, even under the most demanding of racing conditions, our Cobra™ Hoses & Fittings are the best in the industry. They are simple to assemble and install,... |
$7.95 | $18.95 |
|
|
| #6 Cobra™ Fuel Hose Fitting, Swivel Flare to Hose, 90 Degree | #6 Cobra™ Fuel Hose Fitting, Swivel Flare to Hose, 150 Degree |
| If you want nothing less than top-notch quality fuel hoses that won't leak or fail, even under the most demanding of racing conditions, our Cobra™ Hoses & Fittings are the best in the industry. They are simple to assemble and install,... | If you want nothing less than top-notch quality fuel hoses that won't leak or fail, even under the most demanding of racing conditions, our Cobra™ Hoses & Fittings are the best in the industry. They are simple to assemble and install,... |
$18.95 | $26.95 |
|
|
| #6 Cobra™ To Stock Fuel Tank Bung Adapter Fitting | Fuel Pressure Gauge, Liquid Filled, 1/8" MPT, Stainless Steel |
This fitting adapts your stock fuel tank to a #6 Cobra™ or other standaard 6AN fuel fitting. | If you're looking for a high quality fuel pressure gauge, this is the one we recommend. Being liquid filled, it prevents the needle from pulsating back and forth as the fuel pump cycles. This gives a more accurate reading on the gauge. The back... |
$18.95 | $39.95 |
| |
| VDO Fuel Pressure Gauge | |
This VDO fuel pressure gauge can be installed using a tee into your fuel system. This guage is not liquid filled, so you might see that the needle bounces around as the fuel pump cycles. | |
$32.95 | |
.png)
The Kaddie Shack..... Your One-Stop Shop For Air-Cooled VW Parts
Kadron Solex H40/44 Carb Specialists, Vintage VW Restoration and Performance Fanatics
Our Products
- Kadron Carburetors, Parts, Accessories, and Labor
- Build-A-Beam™ Axles & Front Suspension
- Cobra™ Performance Fuel & Oil Hoses, Fittings
- Bearings and Seals, Wheels
- Body Panels, Fenders, Aprons, Deck Lids, Pans, Etc
- Books, Manuals, Tools & Tow Bars
- Brakes, Disc Brake Conversions & Upgrades
- Brakes - Stock Replacement
- Bumpers and Related Items
- Cables & Related
- Carburetors & Intake Manifold Related
- Distributors & Ignition
- Electrical
- Engines, Zero Mile Long Blocks
- Engine Parts & Accessories
- Exhaust System Components
- Exterior Parts and Accessories
- Fuel System Components
- Gift & Promotional Items - Shirts, Stickers, Steins, etc.
- Hoses, Clamps, Tees, & Installation Stuff
- Interior Parts and Accessories
- Lights, Lenses, and Related
- Locks, Latches, Handles, Hinges, etc
- Mirrors & Components, Exterior/Interior
- Oils, Sealants, Cleaners, Adhesives, Etc
- Off Road Components
- Seals, Gaskets, & Moldings, Exterior Body
- Shifters and Related
- Steering Column, Coupler, & Related Parts
- Steering Wheels & Adapters
- Rear Suspension & Handling
- Tune Up & Maintenance
- Transmissions and Related
- Wheels and Tires
- Windows & Related Hardware
- Windshield Wipers, Washer, & Related
Featured Item
-
Cobra™ Fuel Pressure Regulator Kit For 40mm Kadron Dual Carbs
This is the ultimate fuel pressure regulator kit for your dual carburetor application. Adjustable from 1 to 4 psi. It comes with all the necessary push-on Cobra™ AN type fittings and braided German hose to complete the installation. It can...
Price: $219.95
