SAVE-A-BUG Hot Oil Temp Sensor - Type 1 Engines Kaddie Shack Push Rod Tubes
SAVE-A-BUG Hot Oil Temp Sensor - Type 1 EnginesKaddie Shack Push Rod Tubes

This is a slick device. EVERYONE should have one if they are not running gauges. It could save you thousands of dollars in costly repairs. It simply replaces your dipstick and the little wire plugs into your stock oil pressure switch right next...

Tired of push rod tube leaks? We were, too. So we had our own made. These billet spring-loaded push rod tubes come with double o-rings for a positive seal, and can be installed without pulling the heads. In fact, when building engines, we prefer...

$34.95

$99.95

12V Chrome Alternator/Generator Pulley Alternator Stand Strap - Stainless Steel
12V Chrome Alternator/Generator PulleyAlternator Stand Strap - Stainless Steel

12V Chrome Generator Pulley Chrome stock size pulley

Stainless steel T-bolt strap

$10.95

$6.95

Alternator/Generator 12V - strap Alternator/Generator Strap  - Chrome
Alternator/Generator 12V - strap Alternator/Generator Strap - Chrome

Zinc 12V alt/gen strap available in chrome and stainless steel 

Polished chrome 12 volt Alternator/Generator Strap

$2.95

$4.95

Aluminum Push Rod Tube - Single Aluminum Valve Covers - Clip On
Aluminum Push Rod Tube - SingleAluminum Valve Covers - Clip On

Fix a leaky push rod tube with this quick and effective fix without removing your engine head(s).

Cast aluminum valve covers are a great for the street and off road use. Comes with HD bale on each side to hold covers on. The valve covers are clearanced for use with hi-lift rockers. Gaskets  and hardware are included

$9.95

$27.95

Billet Fuel Plump Block-Off Plate, Kaddie Shack Billet Aluminum Fuel Pump Block Off Plate with Vent
Billet Fuel Plump Block-Off Plate, Kaddie ShackBillet Aluminum Fuel Pump Block Off Plate with Vent
Quality MADE IN USA billet fuel pump block-off plate, laser-engraved with the Kaddie Shack logo. Comes with stainless steel allen head mounting bolts. Allows you to block off the current fuel pump area on the engine case so you can run an electric pump. Fully anodized for years of good looks.

If you removed the stock fuel pump and need to block off the hole in the crankcase where it was, this is a handy part.  It also includes a threaded bung where you can screw in an oil return line, or plumb to a crankcase vent.

$19.95

$18.95

Broached Billet Steel Crankshaft Pulley Bolt Broached Crankshaft Pulley Bolt
Broached Billet Steel Crankshaft Pulley BoltBroached Crankshaft Pulley Bolt

Billet steel pulley bolt fits stock and aluminum pulleys and has 3/8” drive broach. Easy tightening and good looks makes this pulley bolt a “must have.”

Stock style 3/8” broached pulley bolt. Easy tightening makes this pulley bolt a “must have.”

$9.95

$9.95

Chrome Generator/Alternator Pulley Nut with Spacer Chrome Nut and Washer For Billet Pulley
Chrome Generator/Alternator Pulley Nut with SpacerChrome Nut and Washer For Billet Pulley

Chrome Generator Pulley Nut and Spacer Chrome cone-shaped spacer and smooth cap-style pulley nut adds the finished look to all pulleys for that detailed "show look."

This special chrome nut and washer set is designed to fit our billet alternator/generator pulleys.  Don't forget to order the shims too!

$5.95

$4.95

Chrome Crankshaft Pulley Bolt with Washer Copper Coated Exhaust Nut, 8mm, pack of 8
Chrome Crankshaft Pulley Bolt with Washer Copper Coated Exhaust Nut, 8mm, pack of 8

This Chrome Pulley Bolt and Washer adds the finishing touch to all crank pulley installations Length = 3/4”

 

These really hold the exhaust in place.  Use a 12mm wrench to tighten nut.  Helps get into tight spaces. Locking style. One time use.  Recommend replacing if removed.

$4.95

$4.95

Dip Stick - Billet Dip Stick - Chrome
Dip Stick - BilletDip Stick - Chrome

Add a custom look to your engine compartment with this billet aluminum dip stick.  Not recommended for 35hp

Add this nice detail to your engine compartment. Not recommended for 36hp engines


$9.95

$4.95

Distributor Clamp - Chrome Distributor Clamp, Black Powder-Coated
Distributor Clamp - ChromeDistributor Clamp, Black Powder-Coated

Chrome distributor clamp with nut and bolt. 

Stock style distributor clamp in high quality powder-coated black finish is a nice touch when replacing and old bent or rusty clamp.

$3.95

$8.95

Distributor Clamp -Zinc Billet Aluminum Distributor Clamp With Timing Marks, Polished
Distributor Clamp -ZincBillet Aluminum Distributor Clamp With Timing Marks, Polished

Zinc distributor clamp with nut and bolt. available in chrome 

This billet aluminum distributor clamp is a clean way to dress up any engine. In addition to looking good, it has a practical side. When you set your timing, you can scribe a mark in your distributor casting where the timing is set to align with...

$2.95

$25.95

Billet Aluminum Distributor Clamp With Timing Marks, Black Billet Aluminum Distributor Clamp With Timing Marks, Blue
Billet Aluminum Distributor Clamp With Timing Marks, BlackBillet Aluminum Distributor Clamp With Timing Marks, Blue
This billet aluminum distributor clamp is a clean way to dress up any engine. In addition to looking good, it has a practical side. When you set your timing, you can scribe a mark in your distributor casting where the timing is set to align with...

This billet aluminum distributor clamp is a clean way to dress up any engine. In addition to looking good, it has a practical side. When you set your timing, you can scribe a mark in your distributor casting where the timing is set to align with...

$27.95

$27.95

Billet Aluminum Distributor Clamp With Timing Marks, Red Dog House Oil Cooler Adapter
Billet Aluminum Distributor Clamp With Timing Marks, RedDog House Oil Cooler Adapter

This billet aluminum distributor clamp is a clean way to dress up any engine. In addition to looking good, it has a practical side. When you set your timing, you can scribe a mark in your distributor casting where the timing is set to align with...

Dog House Oil Cooler Adapter When converting from the early style cooler, you will need this adapter. This adapter moves the oil cooler off to the side improving air flow to the cylinders. 

$27.95

$22.95

EMPI Sand-Sealed Santana Laser Engraved Aluminum Pulley EMPI Sand-Sealed Santana Polished Aluminum Pulley
EMPI Sand-Sealed Santana Laser Engraved Aluminum PulleyEMPI Sand-Sealed Santana Polished Aluminum Pulley

This pulley is sand-sealed to make sure your off-road car does not suck dirt into the engine when running. It comes with the collar, seal, and necessary spacers for installation. Having proper timing is essential to making the most power out of...

This pulley is sand-sealed to make sure your off-road car does not suck dirt into the engine when running. It comes with the collar, seal, and necessary spacers for installation. Having proper timing is essential to making the most power out of...

$69.95

$52.95

EMPI Santana Polished Aluminum Pulley EMPI Standard Polished Aluminum Pulley
EMPI Santana Polished Aluminum PulleyEMPI Standard Polished Aluminum Pulley
Having proper timing is essential to making the most power out of your VW engine, as well as making it run cool and get great mileage. This high quality polished aluminum pulley is properly degreed to help you time it properly, and proved good looks at the same time.Having proper timing is essential to making the most power out of your VW engine, as well as making it run cool and get great mileage. This high quality polished aluminum pulley is properly degreed to help you time it properly, and proved good looks at the same time.

$29.95

$29.95

Extra Long Crank Pulley Bolt w/ Washer, For Sand Sealed Pulleys Chrome Coil Bracket with Stainless Steel Coil Cover
Extra Long Crank Pulley Bolt w/ Washer, For Sand Sealed PulleysChrome Coil Bracket with Stainless Steel Coil Cover

This pulley bolt is longer than stock to accomodate pulleys that are deeper than stock such as sand-sealed pulleys.  This provides for additional threads.

If you'd like to dress up your dinghy old beat up coil with someting that looks a little nicer, this might be just the ticket without replacing the whole coil. The stainless cover slips over your coil and the chrome bracket secures it to your fan shroud.

$5.95

$5.95

Oil Filler Extension - Vented Oil Filler Vented - Billet
Oil Filler Extension - VentedOil Filler Vented - Billet

This extension raises the height of your oil filler so that you can add a breather and also an updated look to your engine compartment. 

Customize your engine with billet aluminum. This extension not only makes it easier to pour oil into your engine but also looks AMAZING. 

$10.95

$25.95

Oil Filler With Vent, Black Aluminum Anodized With Billet Cap Polished Billet Aluminum Billet Dipstick with Black Ribs
Oil Filler With Vent, Black Aluminum Anodized With Billet CapPolished Billet Aluminum Billet Dipstick with Black Ribs

This is a really nice quality oil filler with a vent tube fitting included to run to a breather box or ar cleaner.  The black anodized finish adds a nice touch to any engine bay.

Replace your old ugly dipstick with this high quality polished billet aluminum unit with black ribs.  Matches our polished/ribbed VDO oil pressure sender.

$26.95

$19.95

Porsche Style Oil Breather Tower & Oil Filler, Powder-Coated SCAT Santana Billet Pulley, Laser Engraved
Porsche Style Oil Breather Tower & Oil Filler, Powder-CoatedSCAT Santana Billet Pulley, Laser Engraved

This oil breather tower installs on the stock alternator/generator stand. Not only does it provide a distinct Porsche style look to your engine, it induces vacuum from dual carburetors to scavenge crankcase pressure, helping to eliminate oil...

This hard anodized laser engraved billet pulley is hard to beat.  The numbers are permanently etched into the CNC turned surface.

$114.95

$53.95

SCAT Standard Billet Pulley, Laser Engraved Shim Kit - Alternator/Generator (10)
SCAT Standard Billet Pulley, Laser EngravedShim Kit - Alternator/Generator (10)

This hard anodized laser engraved billet pulley is hard to beat.  The numbers are permanently etched into the CNC turned surface.

Shim Kit for Alternator and Generator. This kit includes 10 spacers.

$49.95

$3.95

Hardened Steel 10mm Hex Intake/Exhaust Nut, pack of 8 Fuel Pump Block Off Plate with Coil Mount
Hardened Steel 10mm Hex Intake/Exhaust Nut, pack of 8Fuel Pump Block Off Plate with Coil Mount

These nuts are the choice for superior strength, and for getting into hard to reach places.  Worth every penny for that tough installation.

This is a nice way to accompish two things:  Block your fuel pump area off to eleminate your manual pump, and mount your coil.  It can only be used with overhead style linkage. Will not work with Kadrons with stock or heim joint linkage.

$11.95

$36.95

Solid Brass 11mm Hex Intake Exhaust Nut, pack of 8 12-point Engine Nut, 8mm, pack of 8
Solid Brass 11mm Hex Intake Exhaust Nut, pack of 812-point Engine Nut, 8mm, pack of 8

Brass nuts only have 11mm hex to get into tight spaces and are extra long for better grip.

12-point, 8mm threads. Fits 10mm 12 point socket when extra clearance is needed. Super hard. We especially like them for exhaust studs, as they can be torqued very hard to prevent exhaust studs working loose. Pack of 8

$4.95

$11.95

Stock Oil Cap - Chrome Stock Push Rod Tubes, set of 8
Stock Oil Cap - ChromeStock Push Rod Tubes, set of 8

8968 Update your stock engine with a ne chrome oil cap

Replace those old rusty dirty leaking push rod tubes while you have your heads off.  Don't forget to order our special silicone seals, too!

Sold in sets of 8.

$3.95

$11.95

72 Row Performance Oil Cooler Kit With Fan Aluminum Valve Covers - Bolt On
72 Row Performance Oil Cooler Kit With FanAluminum Valve Covers - Bolt On

This oil cooler features 72 rows of cooling capabilty and an electric fan that can be wired to turn on an off with a temperature sensor (sold seperately) to aid in cooling a stock or performance engine. It comes with 1/2" FPT (Female Pipe Thread)...

Cast aluminum valve covers are a great for the street and off road use. Do not worry about the bale falling off. The valve covers are clearanced for use with hi-lift rockers. Gaskets  and hardware are included

$139.95

$28.95

Bugpack Heavy Duty Cast Aluminum Valve Covers, Pair Dog House Oil cooler
Bugpack Heavy Duty Cast Aluminum Valve Covers, PairDog House Oil cooler
Considered by many to be the strongest and best valve covers ever made, Bugpack valve covers are the best we sell. They offer excellent clearance for high lift rockers and big camshafts. They come with a cast in boss for threading in valve cover vents. Sold in pairs.

Stock Replacement Oil Cooler Keep your cool by replacing that old dirty, leaky Doghouse oil cooler with a brand new unit.

$109.95

$47.95

Empi Oil Breather Box Kit Hi-Performance C-Channel Valve Covers - Bolt On
Empi Oil Breather Box KitHi-Performance C-Channel Valve Covers - Bolt On
Breather boxes have long been used to improve crankcase ventilation. If installed properly, it can help remove the oil mist from the crankcase fumes that are expelled while the engine is running, especially under load. The oil is accumulated and...

Made from cast aluminum, with the EMPI logo and polished ribs on a black background. The finned design helps reduce cylinder head temperature and fits most high lift rocker arms. Complete with all gaskets and hardware. No need to worry about a...

$27.95

$79.95

Inline-8 Fan Thermostat Heater Hose Grommet Seal
Inline-8 Fan ThermostatHeater Hose Grommet Seal

Inline-8 Fan Thermostat Put your oil cooler and fan on automatic. activates at 180oF. 

Are the heater hoses from your fan shroud getting cut by the sharp engine tin as they pass through it to where they connect to the heater boxes? You're losing precious cooling air that needs to get to your engine on a hot day, and losing heating...

$28.95

$2.95