Doghouse 36HP Style Fan Shroud Without Heater Ducts Doghouse 36HP Style Fan Shroud With Heater Ducts
Doghouse 36HP Style Fan Shroud Without Heater Ducts Doghouse 36HP Style Fan Shroud With Heater Ducts

36hp style shrouds allow much greater access to dual carbs.  Besides that, they just look cool.  This one fits the 1971 and later offset oil cooler and has no heater ducts.

36hp style shrouds allow much greater access to dual carbs.  Besides that, they just look cool.  This one fits the 1971 and later offset oil cooler.

$58.95

$64.95

Non-Doghouse 36HP Style Fan Shroud Without Heater Ducts Non-Doghouse 36HP Style Fan Shroud With Heater Ducts
Non-Doghouse 36HP Style Fan Shroud Without Heater Ducts Non-Doghouse 36HP Style Fan Shroud With Heater Ducts

36hp style shrouds feature correctly engineered internal air baffles. Fan shroud does not have ducts for heaters. This shroud takes the 1970 and earlier oil cooler.  

36hp style shrouds feature correctly engineered internal air baffles.  This one takes the 1970 and earlier style oil cooler.  

$49.95

$58.95

Doghouse 36HP Style CHROME Fan Shroud Without Heater Ducts Doghouse 36HP Style CHROME Fan Shroud With Heater Ducts
Doghouse 36HP Style CHROME Fan Shroud Without Heater Ducts Doghouse 36HP Style CHROME Fan Shroud With Heater Ducts

36hp style shrouds allow much greater access to dual carbs.  Besides that, they just look cool.  This one fits the 1971 and later offset oil cooler and has no heater ducts.

36hp style shrouds allow much greater access to dual carbs.  Besides that, they just look cool.  This one fits the 1971 and later offset oil cooler.

$67.95

$79.95

Non-Doghouse 36HP Style CHROME Fan Shroud Without Heater Ducts Non-Doghouse 36HP Style CHROME Fan Shroud With Heater Ducts
Non-Doghouse 36HP Style CHROME Fan Shroud Without Heater Ducts Non-Doghouse 36HP Style CHROME Fan Shroud With Heater Ducts

36hp style shrouds feature correctly engineered internal air baffles. Fan shroud does not have ducts for heaters. This shroud takes the 1970 and earlier oil cooler.  

36hp style shrouds feature correctly engineered internal air baffles.  This one takes the 1970 and earlier style oil cooler.  

$54.95

$60.95

Dual Port Cylinder Shrouds (pair) - Black Dual Port Cylinder Shrouds (pair) - Chrome
Dual Port Cylinder Shrouds (pair) - BlackDual Port Cylinder Shrouds (pair) - Chrome

Steel cylinder shroud finished in gloss black. Great replacement for your old damaged tins.

Bright and shiny, chrome engine tins can really spruce up an old engine.

$25.95

$27.95

Single Port Cylinder Shrouds (pair) - Black Single Port Cylinder Shrouds (pair) - Chrome
Single Port Cylinder Shrouds (pair) - BlackSingle Port Cylinder Shrouds (pair) - Chrome

Steel cylinder shroud finished in gloss black. Great replacement for your old damaged tins.

Bright and shiny, chrome engine tins can really spruce up an old engine.

$25.95

$27.95

Fan Shroud Mounting Kit For Coil Or Other Accessories Deluxe Stainless Steel Allen Head Engine Tin Screws/Washers 12pk
Fan Shroud Mounting Kit For Coil Or Other AccessoriesDeluxe Stainless Steel Allen Head Engine Tin Screws/Washers 12pk
This is the professional way to mount your ignition coil or other accessories to your fan shroud without cracking it. Simply mark and drill the holes in the shrould where you want the mount to be. The rubber insert slips into the hole. As you...When a show quality engine build is on the agenda, these stainless screws can really make an engine stand out amongst the crowd. They will not rust, hold securely, and give a unique and classy look. The spring loaded washers help to keep them...

$5.95

$7.95

Stainless Steel Button Allen Head Engine Tin Screws, 68 pcs Engine Tin Screw Kit 12pcs
Stainless Steel Button Allen Head Engine Tin Screws, 68 pcsEngine Tin Screw Kit 12pcs
If you're looking for a really nice way to dress up your engine, using stainless button-head screws to secure all of your sheet metal is a great way to attain that show-car look. This kit comes with 34 allen head screws and 34 matching washers, enough to do your entire engine.

Engine tin screw set comes with 12 screws.  The VW engine takes 38 in total for all the tins.

$15.95

$3.95

Breast Plate Tin (stock) - Black Breast Plate Tin (stock) - Chrome
Breast Plate Tin (stock) - BlackBreast Plate Tin (stock) - Chrome

Seals off exhaust heat from engine compartment.  Stock Style

Seals off exhaust heat from engine compartment.  Stock Style chrome.

$18.95

$21.95

Breast Plate Tin - Black Breast Plate Tin - Chrome
Breast Plate Tin - BlackBreast Plate Tin - Chrome

Seals off exhaust heat from engine compartment. With out air hose, with out heat risers

Seals off exhaust heat from engine compartment. With out air hose, with out heat risers

$18.95

$21.95

Breast Plate Tin w/ Hose - Black Breast Plate Tin w/ Hose - Chrome
Breast Plate Tin w/ Hose - BlackBreast Plate Tin w/ Hose - Chrome

Seals off exhaust heat from engine compartment. With air hose, with out heat risers

Seals off exhaust heat from engine compartment. With air hose, with out heat risers

$18.95

$21.95

Breast Plate Tin w/ Risers- Black Breast Plate Tin w/ Risers- Chrome
Breast Plate Tin w/ Risers- BlackBreast Plate Tin w/ Risers- Chrome

Seals off exhaust heat from engine compartment. With out air hose, with heat risers

Seals off exhaust heat from engine compartment. With out air hose, with heat risers. Chrome.

$18.95

$21.95

Cylinder Cool Tin (pair) - Black Cylinder Cool Tin (pair) - Chrome
Cylinder Cool Tin (pair) - BlackCylinder Cool Tin (pair) - Chrome

Type 3 cool tins are must for any performance or off road application. Use these tins when the sleds do not fit.Sold as a pair

Type 3 cool tins are must for any performance or off road application. Use these tins when the sleds do not fit.Sold as a pair

$13.95

$13.95

Engine Cylinder Air Deflector For 8mm Head Studs Engine Cylinder Air Deflector For 10mm Head Studs
Engine Cylinder Air Deflector For 8mm Head StudsEngine Cylinder Air Deflector For 10mm Head Studs

These air deflectors clip into place underneath the cylinders to help cooling air circulate from the fan shroud and are ESSENTIAL for proper cooling.  One installs on each side.  2 are required for each engine.

These air deflectors clip into place underneath the cylinders to help cooling air circulate from the fan shroud and are ESSENTIAL for proper cooling.  One installs on each side.  2 are required for each engine.

$2.95

$2.95

Doghouse Cooler Air Exit Tin Set (2 pcs.) - Black Doghouse Cooler Air Exit Tin Set (2 pcs.) - Chrome
Doghouse Cooler Air Exit Tin Set (2 pcs.) - BlackDoghouse Cooler Air Exit Tin Set (2 pcs.) - Chrome

2 piece tin set attaches to the back of a dog house type fan shroud to direct the hot air coming off the cooler out of the engine compartment.  Complete with seals

2 piece tin set attaches to the back of a dog house type fan shroud to direct the hot air coming off the cooler out of the engine compartment.  Complete with seals

$23.95

$27.95

Engine Pulley Tin - Black Engine Pulley Tin - Chrome
Engine Pulley Tin - BlackEngine Pulley Tin - Chrome

Pulley fits behind the pulley and protects debris from damaging your pulley.

Pulley fits behind the pulley and protects debris from damaging your pulley.

$8.95

$8.95

Engine Heater Channel Sled Tin Set, Black Engine Heater Channel Sled Tin Set, Chrome
Engine Heater Channel Sled Tin Set, BlackEngine Heater Channel Sled Tin Set, Chrome

The finishing touch to control engine heat. Fits between heater boxes/j-tubes and engine case.

The finishing touch to control engine heat. Fits between heater boxes/j-tubes and engine case.

$26.95

$28.95

Firewall Tin for Doghouse Cooler Set Up Firewall Tin for Doghouse Cooler Set Up - Chrome
Firewall Tin for Doghouse Cooler Set UpFirewall Tin for Doghouse Cooler Set Up - Chrome

Absolutely necessary to prevent hot air from circulating into engine bay.

Absolutely necessary to prevent hot air from circulating into engine bay.

$18.95

$21.95

Firewall Tin, Early - Black Firewall Tin, Early - Chrome
Firewall Tin, Early - BlackFirewall Tin, Early - Chrome

Firewall tin for non-doghouse style oil coolers prevents heat fron entering engine bay, aboslutely necessary for proper cooling.

Firewall tin for non-doghouse style oil coolers prevents heat fron entering engine bay, aboslutely necessary for proper cooling.

$18.95

$21.95

Stock Valve Covers with Bales and Gaskets, Black, Pair Stock Valve Covers with Bales and Gaskets, Chrome, Pair
Stock Valve Covers with Bales and Gaskets, Black, PairStock Valve Covers with Bales and Gaskets, Chrome, Pair

Some prefer the look and fit of stock valve covers on their VW's.  If yours are dinged up or don't seal well, we have quality replacements. Sold in pairs and come with gaskets and new retainers.  Fit 61+ Type 1.

Stock style chrome valve covers can make an engine really stand out in the crowd.  Sold in pairs and come with gaskets and new retainers.  Fit 61+ Type 1.

$21.95

$19.95

Alternator/Generator Stand, Raw Alternator/Generator Stand, Chrome
Alternator/Generator Stand, RawAlternator/Generator Stand, Chrome

This stand fits both alternators and generators, so its universal both both applications or when upgrading to an alternator.  

This stand fits both alternators and generators, so its universal both both applications or when upgrading to an alternator.  

$15.95

$23.95

Alternator/Generator Backing Plate Kit - Black Alternator/Generator Backing Plate Kit - Chrome
Alternator/Generator Backing Plate Kit - BlackAlternator/Generator Backing Plate Kit - Chrome

3-piece stock style kits

Dress up your fan shroud with this 3-piece chrome alternator/generator backing plate kit

$11.95

$11.95

Lower Cylinder Air Deflector Tin, Left Side Lower Cylinder Air Deflector Tin, Right Side
Lower Cylinder Air Deflector Tin, Left SideLower Cylinder Air Deflector Tin, Right Side

This is the little deflector tin that sits underneath the main cylinder tin toward the rear of the car.  It keeps cooling air from escaping around the sides of the cylinder.

This is the little deflector tin that sits underneath the main cylinder tin toward the rear of the car.  It keeps cooling air from escaping around the sides of the cylinder.

$12.95

$12.95

Generator/Alternator Stand Deflector Plate Generator/Alternator Stand Gasket, sold each
Generator/Alternator Stand Deflector PlateGenerator/Alternator Stand Gasket, sold each

Installs under the stand to prevent oil from sloshing up when the engine is running.  Be sure to order the top and bottom gaskets to keep it from leaking!

Installs above and below the oil deflector plate.  Sold each.  ORDER TWO.

$1.95

$0.95

Stock Cooling Fan, Late Model Wide for Doghouse Cooler HD WELDED Cooling Fan, Late Model Wide for Doghouse Cooler
Stock Cooling Fan, Late Model Wide for Doghouse CoolerHD WELDED Cooling Fan, Late Model Wide for Doghouse Cooler

A common cause for overheating is to have the improper early fan installed on a late model car. This is the stock cooling fan for late model doghouse cooler with the wider fan blade. NOTE: THis fan is approximately 37mm wide and NECESSARY for...

A common cause for overheating is to have the improper early fan installed on a late model car. This HEAVY DUTY fan is the correct cooling fan for late model doghouse cooler with the wider fan blade. This fan has been welded on every other fan...

$34.95

$64.95

RACE QUALITY Cooling Fan, Late Model Wide for Doghouse Cooler Engine Mounting Bolts and Nuts Set
RACE QUALITY Cooling Fan, Late Model Wide for Doghouse CoolerEngine Mounting Bolts and Nuts Set
This SUPER DUTY RACE fan is the correct cooling fan for late model doghouse cooler with the wider fan blade. This fan has been welded on every fan blade, unlike the HD unit that is only welded on every other blade, and dynamically balanced for...

These are the correct nuts and bolts you'll need to mount the engine into the car.  This kit will fit dual port, single port, and 40hp style motors. 

$89.95

$5.95

Lower Engine Mounting Stud, for Type 1 Engine, All Copper Coated Exhaust Nut, 8mm, pack of 8
Lower Engine Mounting Stud, for Type 1 Engine, AllCopper Coated Exhaust Nut, 8mm, pack of 8

This is the stud that threads into the engine case below the flywheel.  It is common for them to get bent or stripped over the years.

These really hold the exhaust in place.  Use a 12mm wrench to tighten nut.  Helps get into tight spaces. Locking style. One time use.  Recommend replacing if removed.

$4.95

$4.95

Solid Brass 11mm Hex Intake Exhaust Nut, pack of 8 Hardened Steel 10mm Hex Intake/Exhaust Nut, pack of 8
Solid Brass 11mm Hex Intake Exhaust Nut, pack of 8Hardened Steel 10mm Hex Intake/Exhaust Nut, pack of 8

Brass nuts only have 11mm hex to get into tight spaces and are extra long for better grip.

These nuts are the choice for superior strength, and for getting into hard to reach places.  Worth every penny for that tough installation.

$4.95

$11.95

12-point Engine Nut, 8mm, pack of 8 Cooling Fan Mounting Hub Kit
12-point Engine Nut, 8mm, pack of 8Cooling Fan Mounting Hub Kit
12-point, 8mm threads. Fits 10mm 12 point socket when extra clearance is needed. Super hard. We especially like them for exhaust studs, as they can be torqued very hard to prevent exhaust studs working loose. Pack of 8This kit comes with the two pieces to mount your cooling fan to your alternator or generator. You can use both or one of the wavy washers to space your fan properly so it does not hit the fan shroud while spinning. TIP: Use alternator/generator thin pulley shims to set the spacing perfectly.

$11.95

$10.95

German Heater Hose, From Fan Shroud To Heater Boxes Heater Hose Grommet Seal
German Heater Hose, From Fan Shroud To Heater BoxesHeater Hose Grommet Seal

If you need to change your heater hoses, this German hose is the best choice.  Constructed of aluminum, it is overlayed inside and out with paper.  One length of hose is generally sufficient to do both sides.  

Are the heater hoses from your fan shroud getting cut by the sharp engine tin as they pass through it to where they connect to the heater boxes? You're losing precious cooling air that needs to get to your engine on a hot day, and losing heating...

$11.95

$2.95

Heater Duct Plugs for Aftermarket 36HP Fan Shroud, Pair Heater Duct Plugs for Stock VW Fan Shroud, Pair
Heater Duct Plugs for Aftermarket 36HP Fan Shroud, PairHeater Duct Plugs for Stock VW Fan Shroud, Pair

If you are no longer using the heater ducts on your aftermarket 36HP style fan shroud, these plugs will install in the outlets to prevent your precious cooling air from escaping. Sold in pairs and comes wiith screws to install.

If you are no longer using the heater ducts on your stock OE VW fan shroud, these plugs will install in the outlets to prevent your precious cooling air from escaping. Sold in pairs and comes wiith screws to install.

$3.95

$3.95

Heater Box Adapter Tube, Connector Pipe Heater Box Hose Clamp
Heater Box Adapter Tube, Connector PipeHeater Box Hose Clamp

This is the connectoir pipe that fits into your heater box to allow connection of the fresh air hose from the fan shroud.  It requires a special clamp to secure the hose.

This is the clamp that secures the heater hose that comes from the fan shroud to the metal tube where it inserts in the heater box.

$2.95

$3.95