SAVE-A-BUG Hot Oil Dipstick Temp Sensor - Type 1 Engines Oil Pressure Switch For Type 1 Engines, All
SAVE-A-BUG Hot Oil Dipstick Temp Sensor - Type 1 EnginesOil Pressure Switch For Type 1 Engines, All

This is a slick device. EVERYONE should have one if they are not running gauges. It could save you thousands of dollars in costly repairs. It simply replaces your dipstick and the little wire plugs into your stock oil pressure switch right next...

This is the stock oil pressure switch for all Type 1 engines of all years.

$34.95

$4.95

German Oil Pressure Switch For Type 1 Engines, All VDO Oil Pressure Gauge, 80 PSI
German Oil Pressure Switch For Type 1 Engines, AllVDO Oil Pressure Gauge, 80 PSI

If your oil pressure light is flickering on and off, or stays on all the time, it could be a defective oil pressure switch.  This quality German replacement fits all Type 1 engines.

An oil pressure guage is one of the essential gauges one should run to monitor any performance VW engine.  VDO is a perfect match for the VW, as the original gauges in the VW's were made by VDO.  

$9.95

$40.95

VDO Oil Temperature Gauge, 300 degrees VDO Voltmeter Gauge
VDO Oil Temperature Gauge, 300 degreesVDO Voltmeter Gauge

An oil temperature guage is one of the essential gauges one should run to monitor any performance VW engine. VDO is a perfect match for the VW, as the original gauges in the VW's were made by VDO. Sending units are electrical, and easy to wire to...

A voltmeter can be a handy tool for keeping an eye on your charging system and battery, and makes a great third gauge next to your oil pressure and temp.  Gauge fits in a 2-1/16" opening.

$36.95

$39.95

VDO 3-1/8" 7000 RPM Tachometer VDO Mini Tachometer
VDO 3-1/8" 7000 RPM TachometerVDO Mini Tachometer

This VDO tachometer measures 3-1/8" for easy viewing, and comes with and adjustable needle.  It requires no sending unit.  VDO is a perfect match for the VW, as the original gauges in the VW's were made by VDO.

This mini VDO tach will match your other VDO gauges, and is a convenient addition when installing other VDO gauges.  It requires no sending unit.  Gauge fits in a 2-1/16" opening.

$114.95

$109.95

Fuel Gauge in Dash, Mechanical, '62 to '67 Bug VDO Oil Temperature Sender M18
Fuel Gauge in Dash, Mechanical, '62 to '67 BugVDO Oil Temperature Sender M18

If the mechanical fuel gauge in the dash of your early Bug is malfunctioning, it can really leave you stranded Literally!  This is a replacement that comes with the gauge and cable co connect to your sender.

Here's a very simple way to install the sending unit for your VDO oil temperature gauge.  Simply unscrew the plug in the bottom of the case that holds your oil pressure relief spring, and replace it with this sender.

$42.95

$25.95

VDO Oil Pressure Sender M10 Billet Aluminum Cover For VDO Oil Pressure Sending Unit
VDO Oil Pressure Sender M10Billet Aluminum Cover For VDO Oil Pressure Sending Unit
Here's the best and simplest way to install your pressure sender for your 80 psi VDO gauge. Simply inscrew the stock sender and screw this one directly into the case. This sender has two poles: One for the existing wire, one for the gauge wire. Super simple. Super accurate.Does that VDO oil pressure sending unit make your engine look ugly? Here's a nifty way to dress it up a bit. This billet aluminum cover slips right over the sender and adds a little pizzaz. It is secured in place by a small set screw. It also matches our billet aluminum oil dipstick.

$51.95

$22.95

Dash Gauge Panel for 2-1/16" VDO Gauges, Fits '58 to '67 Bugs EMPI VDO 3-Gauge In-Dash Panel 2-1/16"
Dash Gauge Panel for 2-1/16" VDO Gauges, Fits '58 to '67 BugsEMPI VDO 3-Gauge In-Dash Panel 2-1/16"
Do you need a really clean way to install your VDO dash gauges in your early Bug? This is a sano way to accomplish just that. This gauge panel fits where your radio cut-out is and looks factory. The gauges are held in place behind the panel, so...

VDO gauge panel fits 2-1/16" gauges, replacing the stock Bug dash panels.  Super sano!

$164.95

$11.95

EMPI VDO 3-Gauge In-Dash Panel 2-1/16" & 3-1/8" EMPI VDO 1-Gauge In-Dash Panel 2-1/16"
EMPI VDO 3-Gauge In-Dash Panel 2-1/16" & 3-1/8"EMPI VDO 1-Gauge In-Dash Panel 2-1/16"

VDO gauge panel fits 2-1/16" gauges,and a 3-1/8" tachometer, replacing the stock Bug dash panels.  Super sano!

VDO gauge panel fits 2-1/16" gauges, replacing the stock Bug dash panels.  Super sano!

$11.95

$8.95

EMPI VDO 2-Gauge In-Dash Panel 2-1/16" VDO 1-Gauge Panel 2-1/16"
EMPI VDO 2-Gauge In-Dash Panel 2-1/16"VDO 1-Gauge Panel 2-1/16"

VDO gauge panel fits 2-1/16" gauges, replacing the stock Bug dash panels.  Super sano!

VDO gauge panel fits 2-1/16" gauges

$8.95

$13.95

VDO 2-Gauge Panel 2-1/16" VDO 3-Gauge Panel 2-1/16"
VDO 2-Gauge Panel 2-1/16"VDO 3-Gauge Panel 2-1/16"

VDO gauge panel fits 2-1/16" gauges

VDO gauge panel fits 2-1/16" gauges

$15.95

$19.95

Fuel Gauge Vibrator All 68+ Bug & Super, 73-74 Ghia, 73+ Bus Fuel Pressure Gauge, Liquid Filled, 1/8" MPT, Stainless Steel
Fuel Gauge Vibrator All 68+ Bug & Super, 73-74 Ghia, 73+ BusFuel Pressure Gauge, Liquid Filled, 1/8" MPT, Stainless Steel

Replacement 12V fuel gauge vibrator is installed on the back of the late model speedometers.  This unit stabilizes the needle on the fuel gauge to give an accurate reading.

If you're looking for a high quality fuel pressure gauge, this is the one we recommend. Being liquid filled, it prevents the needle from pulsating back and forth as the fuel pump cycles. This gives a more accurate reading on the gauge. The back...

$17.95

$39.95

VDO Fuel Pressure Gauge VDO Replacement Stock Dash and Gauge Bulbs, 4-Pack 9/32"
VDO Fuel Pressure GaugeVDO Replacement Stock Dash and Gauge Bulbs, 4-Pack 9/32"

This VDO fuel pressure gauge can be installed using a tee into your fuel system.  This guage is not liquid filled, so you might see that the needle bounces around as the fuel pump cycles.

These quality replacement bulbs are made by VDO to replace your instrument lights when they burn out. They are used in stock VW dash gauges. They measure approximately 9/32" in diameter a little longer than 13/16" long overall. Fits socket# 600816.

$32.95

$15.95

VDO Replacement Dash and Gauge Bulbs, 4-Pack 11/32" Fuel Tank Sending Unit, Mechanical, '62 to '67 Type  1
VDO Replacement Dash and Gauge Bulbs, 4-Pack 11/32"Fuel Tank Sending Unit, Mechanical, '62 to '67 Type 1
These quality replacement bulbs are made by VDO to replace your instrument lights when they burn out. They are used in stock VW dash gauges, as well as some aftermaerket ones. They measure approximately 11/32" in diameter at the base. Fit socket #600819.

Is your fuel gauge not reading properly?  This quality replacement will get you back up and running in no time!  Be sure to order a gasket with it, as no gasket is supplied.

$15.95

$32.95

Fuel Tank Sending Unit, Super Beetle '71 to '79 Fuel Tank Sending Unit, VDO, Type 1 '68 & Up Standard Bug
Fuel Tank Sending Unit, Super Beetle '71 to '79Fuel Tank Sending Unit, VDO, Type 1 '68 & Up Standard Bug

Is your fuel gauge not reading properly in your Super Beetle?  This sender is different than the standard Bug.  It's easily identified by the two floats it has.  It also requires the circular o-ring type seal.

Is your fuel gauge not reading properly?  This is a quality VDO replacement, made by the same company who made the original gauge for VW.

$55.95

$44.95

Fuel Tank Sending Unit Gasket Kit with Screws, '62+ (not Super) Fuel Tank Sending Unit Seal (O-ring), All Super Beetle
Fuel Tank Sending Unit Gasket Kit with Screws, '62+ (not Super)Fuel Tank Sending Unit Seal (O-ring), All Super Beetle

If your fuel tank is leaking from the top where the sending unit is installed, this may fix your problem.  Replacement gasket kit comes with new mounting screws.  Fits standard Bug only, not Super Beetles.

If your fuel tank is leaking from the top where the sending unit is installed, this may fix your problem.  Replacement o-ring seal fits Super Beetle only.

$3.95

$3.95

Dash Gauge Bulb Socket, Fits Various Models
Dash Gauge Bulb Socket, Fits Various Models

This is the socket that plugs into the back of the speedometer and other gauges and holds the little light bulb in place.  Fits bulb#600802.  It is common for these to corrode or break after decades of service.

$6.95