This kit replaces the stock air cleaner mounting bracket with an improved model for less restriction and better breathing. We've seen gains as much as 8 horsepower during dyno testing for Hot VW's Magazine and have been thoroughtly impressed ever...

We can supply you with the exact size jets you need to match your engine, altitude, and driving habits! We have spent hundreds and hundreds of hours testing and perfecting our Kadron jetting to make sure you get the correct size you need on the...

The emulsion tube and air correction jet on Solex H40/44EIS carburetors is a one piece unit. It is not a serviceable part, per the manufacturer. We see a great many failures of this part, which would normally necessitate replacement of the entire...

We prefer using only factory Solex Brosol Venturis when servicing Kadron carbs. Venturis are available to match each and every engine combo. Whether you are running a stock 1300 or a wild 2 liter, these venturis are the best bet to get the most...

We prefer using only factory Solex Brosol Venturis when servicing Kadron carbs. Venturis are available to match each and every engine combo. Whether you are running a stock 1300 or a wild 2 liter, these venturis are the best bet to get the most...

Do you need serious power for your larger displacement? Venturis are available to match each and every engine combo. Whether you are running a stock 1300 or a wild 2 liter, these venturis are the best bet to get the most power out of your engine....

SOLD IN PAIRS - One pair does both carbsl Venturis are available to match each and every engine combo. Whether you are running a stock 1300 or a wild 2 liter, these venturis are the best bet to get the most power out of your engine. They come in...

The 30mm and 32mm are manufactured by EMPI to fit the 40K carbs, and are a little different design than the original Solex ones. They do not have the "shark fin" in the middle, nor do they have the vacuum hole in the side They will still work...

Replacement genuine factory throttle body for Kadron Solex H40/44EIS carburetor. If your throttle bodies are worn out, loose, plates have gaps against the sides, or the mixture screws do not seal properly, we have replacements for you. If you'd...

This is a replacement throttle body for the EMPI 40K 40mm carburetors.  It will NOT work properly with Kadron Solex H40/44EIS carbs, but is a great replacement for the EMPI 40K's. For the correct Kadron replacement, use #187802.

Tired of those old, worn-out, sloppy throttle bodies? Kaddie Shack exclusive rebuilt and re-bushed throttle bodies are better than new... much better, actually. Even new throttle bodies are notoriously sloppy, causing vacuum leaks and unsteady...