Fan Shroud Mounting Kit For Coil Or Other Accessories Oil Relief Valve Plug With Allen Head Socket
Fan Shroud Mounting Kit For Coil Or Other AccessoriesOil Relief Valve Plug With Allen Head Socket
This is the professional way to mount your ignition coil or other accessories to your fan shroud without cracking it. Simply mark and drill the holes in the shrould where you want the mount to be. The rubber insert slips into the hole. As you...

If you've ever boogered up the slot on the original style VW engine case relief valve plugs, you'll really appreciate these. The original VW plugs have slots that you can stick a large screwdriver in to remove them. If they've been in there...

$5.95

$3.95

Stainless Steel Button Allen Head Engine Tin Screws, 68 pcs Deluxe Stainless Steel Allen Head Engine Tin Screws/Washers 12pk
Stainless Steel Button Allen Head Engine Tin Screws, 68 pcsDeluxe Stainless Steel Allen Head Engine Tin Screws/Washers 12pk
If you're looking for a really nice way to dress up your engine, using stainless button-head screws to secure all of your sheet metal is a great way to attain that show-car look. This kit comes with 34 allen head screws and 34 matching washers, enough to do your entire engine.When a show quality engine build is on the agenda, these stainless screws can really make an engine stand out amongst the crowd. They will not rust, hold securely, and give a unique and classy look. The spring loaded washers help to keep them...

$16.95

$7.95

Engine Tin Screw Kit 12pcs Copper Coated Exhaust Nut, 8mm, pack of 8
Engine Tin Screw Kit 12pcsCopper Coated Exhaust Nut, 8mm, pack of 8

Engine tin screw set comes with 12 screws.  The VW engine takes 38 in total for all the tins.

These really hold the exhaust in place.  Use a 12mm wrench to tighten nut.  Helps get into tight spaces. Locking style. One time use.  Recommend replacing if removed.

$4.95

$5.95

Solid Brass 11mm Hex Intake Exhaust Nut, pack of 8 Hardened Steel 10mm Hex Intake/Exhaust Nut, pack of 8
Solid Brass 11mm Hex Intake Exhaust Nut, pack of 8Hardened Steel 10mm Hex Intake/Exhaust Nut, pack of 8

Brass nuts only have 11mm hex to get into tight spaces and are extra long for better grip.

These nuts are the choice for superior strength, and for getting into hard to reach places.  Worth every penny for that tough installation.

$6.95

$11.95

12-point Engine Nut, 8mm, pack of 8 Lower Engine Mounting Stud, for Type 1 Engine, All
12-point Engine Nut, 8mm, pack of 8Lower Engine Mounting Stud, for Type 1 Engine, All
12-point, 8mm threads. Fits 10mm 12 point socket when extra clearance is needed. Super hard. We especially like them for exhaust studs, as they can be torqued very hard to prevent exhaust studs working loose. Pack of 8

This is the stud that threads into the engine case below the flywheel.  It is common for them to get bent or stripped over the years.

$12.95

$4.95

Engine Mounting Bolts and Nuts Set
Engine Mounting Bolts and Nuts Set

These are the correct nuts and bolts you'll need to mount the engine into the car.  This kit will fit dual port, single port, and 40hp style motors. 

$7.95