Full Flow 26mm Oil Pump, Flat Cam Type, Schadeck, 8mm Stud Heavy Duty 26mm Oil Pump, Dished Cam Type, Schadeck, 8mm Stud
Full Flow 26mm Oil Pump, Flat Cam Type, Schadeck, 8mm StudHeavy Duty 26mm Oil Pump, Dished Cam Type, Schadeck, 8mm Stud

For most any engine, racing or stock, this is the oil pump of choice to use. This is the "Flat Cam" type pump, for use with aftermarket camshafts, or with stock camshafts for earlier engines. The 26mm gears are larger than stock, so they supply...

For most any engine, racing or stock, this is the oil pump of choice to use. This is the "Dished Cam" type pump, for use with stock camshafts for later engines. The 26mm gears are larger than stock, so they supply better oiling than the original...

$42.95

$42.95

Heavy Duty 26mm Oil Pump, Flat Cam Type, Schadeck, 8mm Stud Inline-8 Fan Thermostat
Heavy Duty 26mm Oil Pump, Flat Cam Type, Schadeck, 8mm StudInline-8 Fan Thermostat

For most any engine, racing or stock, this is the oil pump of choice to use. This is the "Flat Cam" type pump, for use with aftermarket camshafts, or with stock camshafts for earlier engines. The 26mm gears are larger than stock, so they supply...

Inline-8 Fan Thermostat Put your oil cooler and fan on automatic. activates at 180oF. 

$42.95

$33.95

Porsche Style Oil Breather Tower & Oil Filler, Powder-Coated WIX Racing Oil Filter - Heavy Duty
Porsche Style Oil Breather Tower & Oil Filler, Powder-CoatedWIX Racing Oil Filter - Heavy Duty

This oil breather tower installs on the stock alternator/generator stand. Not only does it provide a distinct Porsche style look to your engine, it induces vacuum from dual carburetors to scavenge crankcase pressure, helping to eliminate oil...

Ever blow up an oil filter on a cold day? It's super common with VW's, especially. You won't blow this one up! This is rated for extreme use, yet filters. Filters up to 45% more dirt, and down to 61 microns. Heavy duty perforated steel tube core...

$114.95

$15.95

Crankcase Breather Box, Aluminum, -8 AN Fittings, TIG Welded Empi Oil Breather Box Kit
Crankcase Breather Box, Aluminum, -8 AN Fittings, TIG WeldedEmpi Oil Breather Box Kit

Breather boxes have long been used to improve crankcase ventilation. If installed properly, it can help remove the oil mist from the crankcase fumes that are expelled while the engine is running, especially under load. The oil is accumulated and...

Breather boxes have long been used to improve crankcase ventilation. If installed properly, it can help remove the oil mist from the crankcase fumes that are expelled while the engine is running, especially under load. The oil is accumulated and...

$109.95

$35.95

MST Billet Aluminum Full Flow Oil Pump Cover Plate, Red MST Billet Aluminum Full Flow Oil Pump Cover Plate, Blue
MST Billet Aluminum Full Flow Oil Pump Cover Plate, RedMST Billet Aluminum Full Flow Oil Pump Cover Plate, Blue

This billet aluminum full flow oil pump cover fits most stock and aftermarket pumps.  It is precision machined from 6061-T6 aluminum in the USA, and comes with new nylock pump nuts and an exit fitting.  For use with full-flowed cases only.

This billet aluminum full flow oil pump cover fits most stock and aftermarket pumps.  It is precision machined from 6061-T6 aluminum in the USA, and comes with new nylock pump nuts and an exit fitting.  For use with full-flowed cases only.

$32.95

$32.95

MST Billet Aluminum Full Flow Oil Pump Cover Plate, Black Oil Pump Cover with Fitting - Steel
MST Billet Aluminum Full Flow Oil Pump Cover Plate, BlackOil Pump Cover with Fitting - Steel

This billet aluminum full flow oil pump cover fits most stock and aftermarket pumps.  It is precision machined from 6061-T6 aluminum in the USA, and comes with new nylock pump nuts and an exit fitting.  For use with full-flowed cases only.

 steel oil pump cover for full flow system. Fits all VW pumps with 8mm bolt holes.

$32.95

$22.95

Heavy Duty Oil Pump Cover, OE Style Oil Pump Cover - Stock Style
Heavy Duty Oil Pump Cover, OE StyleOil Pump Cover - Stock Style

If your oil pump cover is warped, worn, or otherwise leaking, this heavy duty OEM VW style cover is an excellent replacement.  it is super thick like the original and will not warp when torqued.

This is only the oil pump cover. Made of steel and has 8mm bolt holes

$9.95

$4.95

Dog House Oil cooler Hoover Bit, aka Doghouse Oil Cooler Air Deflector
Dog House Oil coolerHoover Bit, aka Doghouse Oil Cooler Air Deflector

Stock Replacement Oil Cooler Keep your cool by replacing that old dirty, leaky Doghouse oil cooler with a brand new unit.

This is a very important piece that's missing from many engines. It installs betwteen the late "Doghouse" style fan shroud and the oil cooler. Its job is to prevent precious cooling air from excaping the engine through the gap, and to likewsie...

$62.95

$23.95

Dog House Oil Cooler Adapter Engine Oil Cooler,  Early Non-Doghouse Style, Fits '70 & Earlier
Dog House Oil Cooler AdapterEngine Oil Cooler, Early Non-Doghouse Style, Fits '70 & Earlier

Dog House Oil Cooler Adapter When converting from the early style cooler, you will need this adapter. This adapter moves the oil cooler off to the side improving air flow to the cylinders. 

This is the "early" style air cleaner, aka "Non-Doghouse" style.  It is a factory quality replacement, and fits all 1970 and earlier Type 1 engines with the early style fan shroud. Don't forget to order the seals to install it!

$28.95

$124.95

72 Row Performance Oil Cooler Kit With Fan External Oil Cooler Rubber Mounting Damper Kit, Pack/4
72 Row Performance Oil Cooler Kit With FanExternal Oil Cooler Rubber Mounting Damper Kit, Pack/4

This oil cooler features 72 rows of cooling capabilty and an electric fan that can be wired to turn on an off with a temperature sensor (sold seperately) to aid in cooling a stock or performance engine. It comes with 1/2" FPT (Female Pipe Thread)...

Aftermarket oil coolers generally need some sort of mounting damper to dampen vibration and to space the cooler away from a flat mounting surface for improved air flow. This kit of four mounts is an excellent choice. 6mm x 1.0 threads on each end.

$144.95

$13.95

High Performance Oil Cooler with Fan for Limited Space Installs EMPI Oil Breather, Clamp On Style
High Performance Oil Cooler with Fan for Limited Space InstallsEMPI Oil Breather, Clamp On Style
This oil cooler fan set-up is compact, yet very efficient. It can help cool even the largest of performance motors, and fits well underneath the package tray area, fender, or anywhere else that is convenient. It features dual cooling fans that...

If an oil or fuel tank breather is needed to clamp on to a 1/2" tube, this can be an easy fix.

$299.95

$9.95

Valve Cover & Air Cleaner Breather Vents, Pair DELUXE Barbed Valve Cover & Air Cleaner Breather Vents, Pair
Valve Cover & Air Cleaner Breather Vents, PairDELUXE Barbed Valve Cover & Air Cleaner Breather Vents, Pair

Do you need to vent your stock or aftermarket valve covers?  Do you need to add a breather to your air cleaner?  Simply drill a hole and install this vent.

Do you need to vent your stock or aftermarket valve covers? Do you need to add a breather to your air cleaner? Simply drill a hole and install this vent. The deluxe version comes with longer barbed fittings so the hose does not come off as easily.

$6.95

$8.95