High Performance Oil Cooler with Fan for Limited Space Installs MST Billet Aluminum Full Flow Oil Pump Cover Plate, Black
High Performance Oil Cooler with Fan for Limited Space InstallsMST Billet Aluminum Full Flow Oil Pump Cover Plate, Black
This oil cooler fan set-up is compact, yet very efficient. It can help cool even the largest of performance motors, and fits well underneath the package tray area, fender, or anywhere else that is convenient. It features dual cooling fans that...

This billet aluminum full flow oil pump cover fits most stock and aftermarket pumps.  It is precision machined from 6061-T6 aluminum in the USA, and comes with new nylock pump nuts and an exit fitting.  For use with full-flowed cases only.

$299.95

$32.95

MST Billet Aluminum Full Flow Oil Pump Cover Plate, Blue MST Billet Aluminum Full Flow Oil Pump Cover Plate, Red
MST Billet Aluminum Full Flow Oil Pump Cover Plate, BlueMST Billet Aluminum Full Flow Oil Pump Cover Plate, Red

This billet aluminum full flow oil pump cover fits most stock and aftermarket pumps.  It is precision machined from 6061-T6 aluminum in the USA, and comes with new nylock pump nuts and an exit fitting.  For use with full-flowed cases only.

This billet aluminum full flow oil pump cover fits most stock and aftermarket pumps.  It is precision machined from 6061-T6 aluminum in the USA, and comes with new nylock pump nuts and an exit fitting.  For use with full-flowed cases only.

$32.95

$32.95

Oil Filler With Vent, Aluminum Anodized With Billet Cap Oil Filler With Vent, Blue Aluminum Anodized With Billet Cap
Oil Filler With Vent, Aluminum Anodized With Billet CapOil Filler With Vent, Blue Aluminum Anodized With Billet Cap

This is a really nice quality oil filler with a vent tube fitting included to run to a breather box or ar cleaner. The anodized finish adds a nice touch to any engine bay. Comes with 1/2" barbed x 1/4" NPT breather fitting, o-ring, and cork cap gasket.

This is a really nice quality oil filler with a vent tube fitting included to run to a breather box or ar cleaner. The anodized finish adds a nice touch to any engine bay. Comes with 1/2" barbed x 1/4" NPT breather fitting, o-ring, and cork cap gasket.

$29.95

$34.95

Oil Filler With Vent, Red Aluminum Anodized With Billet Cap 72 Row Performance Oil Cooler Kit With Fan
Oil Filler With Vent, Red Aluminum Anodized With Billet Cap72 Row Performance Oil Cooler Kit With Fan

This is a really nice quality oil filler with a vent tube fitting included to run to a breather box or ar cleaner. The anodized finish adds a nice touch to any engine bay. Comes with 1/2" barbed x 1/4" NPT breather fitting, o-ring, and cork cap gasket.

This oil cooler features 72 rows of cooling capabilty and an electric fan that can be wired to turn on an off with a temperature sensor (sold seperately) to aid in cooling a stock or performance engine. It comes with 1/2" FPT (Female Pipe Thread)...

$34.95

$144.95

External Oil Cooler Rubber Mounting Damper Kit, Pack/4 Porsche Style Oil Breather Tower & Oil Filler, Powder-Coated
External Oil Cooler Rubber Mounting Damper Kit, Pack/4Porsche Style Oil Breather Tower & Oil Filler, Powder-Coated
Aftermarket oil coolers generally need some sort of mounting damper to dampen vibration and to space the cooler away from a flat mounting surface for improved air flow. This kit of four mounts is an excellent choice. 6mm x 1.0 threads on each end.

This oil breather tower installs on the stock alternator/generator stand. Not only does it provide a distinct Porsche style look to your engine, it induces vacuum from dual carburetors to scavenge crankcase pressure, helping to eliminate oil...

$13.95

$114.95

Crankcase Breather Box, Aluminum, -8 AN Fittings, TIG Welded SAVE-A-BUG Hot Oil Dipstick Temp Sensor - Type 1 Engines
Crankcase Breather Box, Aluminum, -8 AN Fittings, TIG WeldedSAVE-A-BUG Hot Oil Dipstick Temp Sensor - Type 1 Engines

Breather boxes have long been used to improve crankcase ventilation. If installed properly, it can help remove the oil mist from the crankcase fumes that are expelled while the engine is running, especially under load. The oil is accumulated and...

This is a slick device. EVERYONE should have one if they are not running gauges. It could save you thousands of dollars in costly repairs. It simply replaces your dipstick and the little wire plugs into your stock oil pressure switch right next...

$109.95

$34.95

Engine Oil Screen Strainer, Early (Single Relief) Cases Engine Oil Screen Strainer, Late (Dual Relief) Cases
Engine Oil Screen Strainer, Early (Single Relief) CasesEngine Oil Screen Strainer, Late (Dual Relief) Cases
When changing your engine oil, inspect and clean your strainer when removing your drain plate. Sometimes the strainers can get bent or damaged and require replacement. The dual relief strainers measure 19mm inside the pick up tube holes. The single relief strainers measure 16mm.When changing your engine oil, inspect and clean your strainer when removing your drain plate. Sometimes the strainers can get bent or damaged and require replacement. The dual relief strainers measure 19mm inside the pick up tube holes. The single relief strainers measure 16mm.

$8.95

$6.95

Engine Oil Drain Plug, Type 1 and 3 Engines Engine Oil Drain Plate With Plug and Gaskets, Heavy Duty
Engine Oil Drain Plug, Type 1 and 3 EnginesEngine Oil Drain Plate With Plug and Gaskets, Heavy Duty

Stock engine oil drain plug fits all upright and Type 3 engines 1961 and later.

This Type 1 drain plate is made of super thick heavy duty steel. It will not warp like many of the less expensive ones. It works great on the stock case, and work well on aftermarket oil sumps, as well. Comes with drain plug and German gasket kit.

$2.95

$12.95

Billet Aluminum Engine Oil Drain Plate Kit with Nuts Inline-8 Fan Thermostat
Billet Aluminum Engine Oil Drain Plate Kit with NutsInline-8 Fan Thermostat

Whether your drain plate is damaged, warped, or leaking on your Type 1 engine, or you're building and engine from scratch, this billet aluminum drain plate is a nice touch.  It comes with all new mounting nuts and a magnetic drain plug.

Inline-8 Fan Thermostat Put your oil cooler and fan on automatic. activates at 180oF. 

$27.95

$33.95

WIX Racing Oil Filter - Heavy Duty EMPI Super Capacity 3-1/2 Quart  Oil Sump
WIX Racing Oil Filter - Heavy DutyEMPI Super Capacity 3-1/2 Quart Oil Sump

Ever blow up an oil filter on a cold day? It's super common with VW's, especially. You won't blow this one up! This is rated for extreme use, yet filters. Filters up to 45% more dirt, and down to 61 microns. Heavy duty perforated steel tube core...

Here's perhaps the best designed oil sump on the market in our opinion. It is extra wide (15.5"), allowing approximately 3.5 quarts of extra oil capacity for increased cooling, increased oil life, and super high revving engines and hard cornering...

$15.95

$152.95

EMPI 1-1/2 Quart Oil Sump SCAT Low Profile 1-1/2 quart Oil Sump
EMPI 1-1/2 Quart Oil SumpSCAT Low Profile 1-1/2 quart Oil Sump

Here's a great sump for a great price.  It will add approximately 1.5 quarts to your engine oil capacity, increasing cooling ability, increasing oil life, and allowing more oil for high revving engines.  Includes all installation hardware.

Deluxe high capacity oil sump adds 1.5 quarts of oil for extra cooling and capacity. Low profile design for best ground clearance.

$80.95

$89.95

Dog House Oil cooler Dog House Oil Cooler Adapter
Dog House Oil coolerDog House Oil Cooler Adapter

Stock Replacement Oil Cooler Keep your cool by replacing that old dirty, leaky Doghouse oil cooler with a brand new unit.

Dog House Oil Cooler Adapter When converting from the early style cooler, you will need this adapter. This adapter moves the oil cooler off to the side improving air flow to the cylinders. 

$62.95

$28.95

Engine Oil Cooler,  Early Non-Doghouse Style, Fits '70 & Earlier Empi Oil Breather Box Kit
Engine Oil Cooler, Early Non-Doghouse Style, Fits '70 & EarlierEmpi Oil Breather Box Kit

This is the "early" style air cleaner, aka "Non-Doghouse" style.  It is a factory quality replacement, and fits all 1970 and earlier Type 1 engines with the early style fan shroud. Don't forget to order the seals to install it!

Breather boxes have long been used to improve crankcase ventilation. If installed properly, it can help remove the oil mist from the crankcase fumes that are expelled while the engine is running, especially under load. The oil is accumulated and...

$124.95

$35.95

Full Flow 26mm Oil Pump, Flat Cam Type, Schadeck, 8mm Stud Heavy Duty 26mm Oil Pump, Flat Cam Type, Schadeck, 8mm Stud
Full Flow 26mm Oil Pump, Flat Cam Type, Schadeck, 8mm StudHeavy Duty 26mm Oil Pump, Flat Cam Type, Schadeck, 8mm Stud

For most any engine, racing or stock, this is the oil pump of choice to use. This is the "Flat Cam" type pump, for use with aftermarket camshafts, or with stock camshafts for earlier engines. The 26mm gears are larger than stock, so they supply...

For most any engine, racing or stock, this is the oil pump of choice to use. This is the "Flat Cam" type pump, for use with aftermarket camshafts, or with stock camshafts for earlier engines. The 26mm gears are larger than stock, so they supply...

$42.95

$42.95

Heavy Duty 26mm Oil Pump, Dished Cam Type, Schadeck, 8mm Stud Oil Pump Cover - Stock Style
Heavy Duty 26mm Oil Pump, Dished Cam Type, Schadeck, 8mm StudOil Pump Cover - Stock Style

For most any engine, racing or stock, this is the oil pump of choice to use. This is the "Dished Cam" type pump, for use with stock camshafts for later engines. The 26mm gears are larger than stock, so they supply better oiling than the original...

This is only the oil pump cover. Made of steel and has 8mm bolt holes

$42.95

$4.95

Heavy Duty Oil Pump Cover, OE Style Oil Pump Cover with Fitting - Steel
Heavy Duty Oil Pump Cover, OE StyleOil Pump Cover with Fitting - Steel

If your oil pump cover is warped, worn, or otherwise leaking, this heavy duty OEM VW style cover is an excellent replacement.  it is super thick like the original and will not warp when torqued.

 steel oil pump cover for full flow system. Fits all VW pumps with 8mm bolt holes.

$9.95

$22.95

Oil Filler With Vent, Black Aluminum Anodized With Billet Cap Oil Filler With Tube & Cap, 1500cc & 1600cc Type 1 Engine
Oil Filler With Vent, Black Aluminum Anodized With Billet CapOil Filler With Tube & Cap, 1500cc & 1600cc Type 1 Engine

This is a really nice quality oil filler with a vent tube fitting included to run to a breather box or ar cleaner. The anodized finish adds a nice touch to any engine bay. Comes with 1/2" barbed x 1/4" NPT breather fitting, o-ring, and cork cap gasket.

If you're looking to replace your stock oil filler with the tube and vent that goes to your air cleaner, this is a great unit. It requires the special stock VW oil filler nut and seal to install it, and it's a good idea to install the little...

$34.95

$34.95

Chrome Stock Style Oil Filler w/Vent & Downspout Aluminum Angled Oil Filler With Vent & Billet Cap, Polished
Chrome Stock Style Oil Filler w/Vent & DownspoutAluminum Angled Oil Filler With Vent & Billet Cap, Polished
If you're looking to spruce up your engine bay and like the stock style oil filler set up, this is a great unit. It comes with the oil filler cap, the down tube, and a tube on top to hook your breather hose to your air cleaner. Don't forget to...

This alumimum oil filler makes it easier to add oil to your engine, as it is angled up to allow you to pour oil straight down instead of at an angle. It also features a fluted cap for easy removal and a breather fitting to run a breather hose to...

$12.95

$34.95

Oil Filler Extension - Vented Oil Filler Replacement Screw Cap
Oil Filler Extension - VentedOil Filler Replacement Screw Cap

This extension raises the height of your oil filler so that you can add a breather and also an updated look to your engine compartment. 

Replace your old, cracked or lost screw cap.

$15.95

$3.95

EMPI Oil Breather, Clamp On Style Oil Filler Nut For Alternator/Generator Stand
EMPI Oil Breather, Clamp On StyleOil Filler Nut For Alternator/Generator Stand

If an oil or fuel tank breather is needed to clamp on to a 1/2" tube, this can be an easy fix.

This is the nut that holds the stock oil filler to the altertnator/generator stand.  Don't forget to order the seal!

$9.95

$6.95

Generator/Alternator Stand Oil Filler Gasket Rubber Check Valve For Oil Filler/Breather, Duckbill
Generator/Alternator Stand Oil Filler GasketRubber Check Valve For Oil Filler/Breather, Duckbill

This is the gasket that goes underneath the oil filler where it screws into the gen/alt stand.

Is the rubber check valve missing from the bottom of the steel down tube on your engine? If so, you're sucking dirt back into your crankcase when decelerating. This rubber cap slips onto the end of that tube and acts as a check valve. Don't...

$0.95

$2.95

Oil Pressure Booster Kit For Dual Relief Cases Full Flow Oil Filter Mount, Ports Left
Oil Pressure Booster Kit For Dual Relief CasesFull Flow Oil Filter Mount, Ports Left

This case hardware kit comes complete with all the necessary items to finish your Type 1 universal engine case: Oil relief valve plungers and springs, lower engine mounting studs (the ones under your flywheel), Type 3 block-off plate, relief...

This adapter mount is used to mount an external oil filter on your vehicle when a full-flow oiling system is used. We recommend using the 51515R Wix filter, which will hold up to the extreme pressure that can be generated in the oiling systems, particularly at start ups on cold days.

$5.95

$13.95

Full Flow Oil Filter Mount, Ports Right Fender Mount Bracket For Full Flow Oil Filter Adapter
Full Flow Oil Filter Mount, Ports RightFender Mount Bracket For Full Flow Oil Filter Adapter
This adapter mount is used to mount an external oil filter on your vehicle when a full-flow oiling system is used. We recommend using the 51515R Wix filter, which will hold up to the extreme pressure that can be generated in the oiling systems, particularly at start ups on cold days.This mounting bracket makes it super easy to mount your full flow oil filter inside the driver's side rear fender on a '73 and earlier Bug. It can be modified to fit on other vehicles, as well. It simply mounts to the bumper bracket where it...

$13.95

$16.95